AEM Infinity Plug and Play Jumper Harness 94-96 Nissan Silvia SR20DET
Not for sale or street use in California & CARB states
AEM Infinity Plug and Play Jumper Harness 94-96 Nissan Silvia SR20DET - aem30-3517
AEM Electronics has released their Infinity-6 (PN 30-7106) and -8h (PN 30-7108) ECUs and Plug & Play Adapter Harness (PN 30-3515) for 1989-1998 Nissan RB26DETT engines from the Skyline GT-R and (PN 30-3517) for 1994-1996 Nissan SR20DET engines from the Silvia. When combined with AEM's Plug & Play Adapter Harness, the Infinity completely replaces the factory Nissan ECU and can be quickly installed when using the factory sensors (MAP and AIT sensor required and sold separately). A base map for the engine is included.
Supports OEM Cam Angle Sensor
The AEM Infinity ECU supports the Nissan's OEM Cam Angle Sensor (CAS) "360 Degree" pattern. The base calibration is pre-configured for the OEM CAS. The Infinity ECU can be reconfigured via the Setup Wizard to properly read the 12 crank/1 cam timing pattern on engines using an AEM CAS trigger disk.Œæ
Supports Factory VTC
The Infinity ECU supports the factory Nissan Valve Timing Control (N-VCT) system.
Speed Density Fueling Control
The Infinity ECU does not support the factory Mass Airflow (MAF) sensor. A MAP sensor and an Air Inlet Temperature (AIT) sensor are required. AEM offers an auxiliary MAP/AIT sensor adapter harness (PN 30-3510-00, sold separately) for seamless integration that provides speed density fueling control and allows users to eliminate the factory MAF sensor.
Closed-Loop Wideband Feedback Control
The Infinity ECU includes an on-board UEGO wideband air/fuel ratio (AFR) controller. A Bosch 4.2LSU UEGO sensor (PN 30-2001) is sold separately and an Infinity wideband extension cable (PN 30-3600, sold separately) is recommended.
Plug & Play Harness with Expansion Port
AEM's sealed, weatherproof Plug & Play harness for the Nissan RB26DETT (PN 30-3515) and SR20DET (PN 30-3517) includes an AEMnet port for communication with other AEMnet enabled devices.
An expansion port with a weatherproof 12-pin connector is included in the Plug & Play Adapter Harness for adding common aftermarket sensors including fuel pressure and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and switched inputs for boost target, no-lift shift, etc.
Signal Conditioner for ATTESA AWD System on R34 Skylines
The Infinity has a signal conditioner that ensures proper operation of the AWD system on R34 Skylines.