FREE FAST USA DELIVERY $99+
Add to wishlist
Added to wishlist
Add to compare
Added to compare
HIGHEST QUALITY & SERVICE
LOWEST PRICE GUARANTEE
- Description
- Shipping
- RETURNS
Eibach ERS 12.00 in. Length x 2.50 in. ID Coil-Over Spring - EIB1200.250.0110
Description: Single Spring
Travel: 8.47in
Load @ Block Height: 932lbs
Rate: 110lbs/in
Block Height: 3.53in
ID: 2.50in
Length: 12.00in
A properly tuned spring system provides the muscle needed to transform the power derived from the engine of a racing car to the track through optimum adhesion. Suspension tuning is a precise balance. On one hand, the spring system should be soft enough to compensate for road irregularities assuring permanent road contact, while on the on the other hand the spring system must be firm enough to reduce the body roll, squat, and dive of the vehicle during cornering, acceleration and braking.
For optimum balance, Eibach has developed our world famous ERS double spring system. By combining more than 700 different single spring components, the suspension engineer or weekend enthusiast can create nearly unlimited combinations. Our ERS double-spring system is unsurpassed in performance and flexibility.
The ERS systems relies on a Main and Tender spring concept that provides a softer initial rate when both springs are compressed together, then delivers the desired firmer ending rate once the tender spring closes completely. The Main spring has a linear-rate characteristic and determines the final rate of the system. The Tender springs are available in a variety of linear-rate as well as progressive-rate characteristics and determine the initial rate of the system.
A Helper spring is used to prevent the Main spring from becoming loose in the spring seat when the wheel is at full droop. The Helper spring, unlike the Tender spring, has very little spring rate, and therefore has no effect on the suspension characteristics of the vehicle. Up to 50mm of spring-to-perch gap can be covered with the use of a Helper spring.
Connecting Plates are used to connect Main and Tender springs. Eibach offers both inside and outside diameter connection plates depending upon the dimension and function of the specific damper utilized.
* Uncountable individual combination possibilities to create from standard spring components ex stock
* High spring travel (deflection) and therefore high end loads at short mounting lengths
* Block resistance
* Surface treated through shot-peening
* High dynamic durability (component longevity)
* Precise tolerances
* High quality corrosion protection by phosphating and epoxy coating
* Individual protective packaging
* Easy identification (imprinted with Part no.-indicates spring rate and physical dimensions)
All products ship from USA and typically arrive at the following speeds:
- USA in 1-3 Business Days
- Canada in 1-3 Business Days
- Europe in 2-5 Business Days
- Australia in 3-7 Business Days
- Asia in 3-7 Business Days
- Rest of the World in 5-10 Business Days
*** The following estimated shipping speeds, do not include processing time or back orders. Please expect above shipping speeds on in stock items only.
* We ship internationally, contact us for quotes or simply check out online!
* Free shipping in USA on absolutely everything at Tune2mod with ground shipping. Total must be $99 or more. Valid only within lower 48 states. We may choose faster shipping service depending on product being sold at our cost.
* We have the right to modify or cancel this promotion.
* Special orders, cores or overweight items may result in additional charge.
* Please inquire with us regarding faster shipping methods or overnight delivery.
* We ship from one of our 3 warehouses: Pennsylvania, Nevada or Texas USA
* Fast and reliable shipping is offered through our main worldwide known carriers: FedEx, UPS, DHL and USPS. Simply check out and cheapest/fastest shipping will be automatically provided to you. Shipping is available to most countries in the world.
Duties and Taxes
- Tune2mod must comply with all rules and regulations on exporting and importing laws. We are aware that there may be some duties applied, which is why we will do our best to minimize these, by offering best shipping options that are suitable for your country. It is up to a buyer to determine what these fees are. Tune2mod is not responsible for these fees. Duties and customs fee must be paid directly to courier as we do not impose them. All items ship from USA.
*Our shipping preference*
- Although these are our preferable shipping options, we may change these anytime.
- Shipping to USA: UPS/ FedEx courier
- Shipping to Canada: Canada Post/USPS or DHL courier
- Shipping worldwide: DHL courier or USPS
** Please contact us for more details, questions on specific products and/ or international orders.
Returns will be accepted in first 30 days. Items must be new with original packaging, unused, re-sellable and with all the pieces. No refunds after 30 days. There will be no exchange or returns allowed on any electronics, coilovers, engine internals, turbochargers, superchargers or turbo kits. There are absolutely no returns on items marked "Special Order" or "Pre-Order". No cancellation allowed once the product is shipped. Receipt must be provided with every order returned. Tune2Mod must approve all items processed, with (RMA) number on the box. Restocking fee of 10% of item cost will be charged on all special and non regular stock products (marked as "Not in stock, Pre-Order Now"). A fee to redirect an order will or may apply, which will be calculated depending on size and weight. Shipping and handling fee will not be refunded. Client must pay for shipping. Please expect 2 business days to process a return and 3-5 business days to issue a refund.
For more information, questions or concerns, email us at sales@tune2mod.com
You may also like
Sale
In Stock
